The dispenser of oxygen (flow regulator) is used for adjustment of the oxygen or air flow, supplied to the patient under oxygen and oxygen and air therapy.
The flow is adjusted with a knob located on a rotation gauge. A plug for the medical gas outlet point, chosen to suit the system selected for use, shall be attached to the dispenser.
The device can be mounted directly in the medical oxygen outlet point or the rail, and linked with a plug-ended cord with the medical oxygen outlet point.
We also offer distilled water humidifiers
(250 ml bottles)
Counter-indications:
- do not smoke in direct proximity
- do not use any ignition point nearby
- keep oils and fats away from the dispenser
- do not open the dome while the dispenser is under pressure
Construction:
The detailed description of the dispenser is provided in a leaflet (top left)
Technical data:
- Pressure of work : 5 bar (determined on the scale)
- Filter: porosity of 60 micrometer
- Unit of measurement: Litre for the minute (lpm)
- Accuracy of the reading: +-10%
- Maximum flow: 55 lpm (without the scale)
- Temperature of the work: 20 C
- Possible variants: 2 do 30 lpm, 0.5 do 15 lpm, 0.3 do 5 lpm, 0.1 do 1.5 lpm
- Available in: 12x125, 9/16", 1/4G, 1/2"BSF
- Meaning: 7 digital number put on the casing of the dispenser of oxygen
- Nominal pressure: 0,5 MPa
- Moistening oxygen: 0-60%
- Dispensers of oxygen are CE 0197 marked.
- Dispensers of oxygen are registered by the Office for Registration of Medicinal Products, Medical Devices and Biocides
